|
What are the characteristics of metal stamping processing?Stamping processing is also called sheet metal processing. Specifically, for example, the use of plates to make chimneys, iron drums, fuel tanks and oil cans, ventilation pipes, elbows and heads, Tianyuan places, funnel shapes, etc., the main processes are shearing, bending, bending, bending, welding, riveting, etc. Some knowledge of geometry. It can be seen that the processing of stamping parts is quite widely used, so what are its processing characteristics? Next, the editor will answer this question for you. Metal stamping processing has the following characteristics: 1. During the forming or separation process, the thickness of the sheet changes relatively little, and the internal structure basically does not change. 2. The stamping parts are accurate in size and smooth in surface, generally do not need to be processed or can be used only by supplementary machining as needed. 3. The die used for stamping has high precision, complex manufacturing and high cost, so it is mainly suitable for mass production. 4. High productivity, easy to realize mechanized and automated production. 5. It has a wide range of application, from small instruments to large automobile beams, etc., and can produce stamping parts with complex shapes. The above is about the characteristics of metal stamping parts processing and everyone has briefly described it here. I believe you have learned what characteristics it has, and hope to help you. |